Blade Media BM5000s

Load in the config file by USB just like before.
Menu - Setup - Update & Backup - Image Upgrade
To enter a line manually press "Menu then 9991" on the remote.
Enter you C or N line details
Save (Yellow Button)
Exit out of all of the menus
You will now need to reboot the box, it doesn't do it automatically



If you want to enter a line by USB instead of typing in the details
Open the config file with notepad
C lines are at the top, N lines near the bottom, depending on what type you are using
Make sure you paste over the "#" at the start of each line you enter
Save the changes and put it on your pen drive
Menu - Setup - Update & Backup - Image Upgrade -Select the config file and reboot the box after it has loaded
To get the 7 day EPG, put a pen drive into the box or a USB HDD,
Press EPG on the remote, then download.
You should now be up and running

Esta resposta lhe foi útil?

 Imprimir este Artigo

Veja também

Cloud Ibox 4 CCcam Setup

1. Stick on a clone safe image2. Do your basic setup/ forget the channel scan say you will di it...

How to Make CCcam.cfg file

Most of the satellite receiver boxes need CCcam.cfg file with your CCcam lines in it in order to...

How to set cccam in Iris 9900 HD

In this tutorial I will try to explain briefly how to configure cccam in 9900 Iris HD decoders,...

Openbox and Skybox CCcam Setup

ATTACH BOX TO POWER CABLE, SATELLITE CABLE, HDMI CABLE AND NETWORK CABLECLINE SETUP1: Go into the...

Spiderbox CCcam Setup

How to CCcam Setup for a Spiderbox via USB or remote controlWhat do you need?1. USB Stick2. Valid...